Sor Single Point Ultrasonic Level Switch Manual de usuario descargar pdf (Pagina 3)

Form 712 (05.13) ©SOR Inc.

3/12

Horizontal Mounting

When tightened securely, the sensor

cavity must be positioned vertically for

optimum drainage when process liquid

level drops below the sensor cavity.

An alignment mark X stamped on a

wrench flat (or on the dry face of a

flange below the housing) shows

sensor cavity orientation.

Optimum drainage occurs when the X

mark is located at 6 or 12 o’clock.

Level is detected when the sensor

cavity is filled with process liquid.

The sensor must project through a tank

fitting so that the sensor cavity is at least

1” beyond the inner wall of the tank.

Sensor Cavity

1 inch

minimum

Top View

Alignment mark

X on wrench flat

at 12 o’clock

Housing

Hub

Alternate position

for alignment

mark X: 6 o’clock

Open Sump or Basin

Do not suspend the unit by rigid

conduit installed in the electrical hub.

When installing the unit over an open

sump or basin use a suitable bracket

to support the instrument.

NOTE: The instrument must be

positioned so that over ow does

not  ood the electrical housing.

Bracket

1 2 3 4 5 6 7 8 ... 11 12

Comentarios a estos manuales

Sin comentarios